The ES2600 Series surface mounted electric strikes are high
security products manufactured from solid stainless steel and
designed to be used with existing and new panic bars fitted to
emergency doors.
When used in conjunction with a standard access control system,
these strikes convert "Exit only" doors with "Pullman type" latches
into a full access controlled door, thereby allowing authorised
access from the secure side.
The ES2600 series are fully monitored with both solenoid and
latch/door monitoring functions & can be changed from fail safe
to fail secure on site.
Key Features
- Fail safe/fail secure changeable on site
- High security
- Available in 12 or 24Vdc
- 650kg holding force
- 1 million cycles endurance rating
- Body depth only 27mm
- Cast stainless steel body
- Low current consumption - max 175Ma @ 12Vdc
- Continuously rated solenoid
- Installation template
- Australian designed and made
- Tricare 5 Year Warranty
Applications
- For use with panic bars
- Surface mount
- Egress doors
- Fire rated door sets
- Open out door sets
- Suitable for use with all access control systems
Standards and Compliance
- Successfully fire rated up to 4hrs on fire door assemblies in
accordance with AS1905.1. 2005 (Part 1: Fire resistant door
sets)
- Approved to UL1034 (highest level)
- CE Approved
- C-Tick Certified
Voltage
12 or 24Vdc
Current
175mA @ 12Vdc - 88mA @ 24Vdc
Solenoids
Solenoids rated for continuous use.
Monitoring
Solenoid Monitor - 1 amp NO/NC microswitch
Door / Latch Monitor - 1 amp NO/NC microswitch
Holding Force
650kg Static Strength Rating
Endurance
Cycle tested to 1,000,000 operations
Additional
Anti friction roller (patented)
Suits panic bars with 15 to 20mm Pullman latch projection
Environment
Operational temperature range - 20C to +60C
Body
Solid Stainless Steel Construction
Keeper
Stainless Steel
Specification Statement
The strike should be constructed of solid stainless steel,
have a minimum holding force of 650kg and have an endurance rating
of 1 million cycles. Maximum penetration into the door frame should
not exceed 12mm. The one strike must be changeable from fail safe
to fail secure on site where required. The strike should not
consume current greater than 175mA at 12Vdc and have a solenoid
rated for continuous use. Certifications must include CE, C-Tick
and 4hr fire rating.
_________________________________________________________
Ordering Information
102601-000
12V Fail Safe with Roller Keeper for Panic Bar
102602-000
12V Fail Secure with Roller Keeper for Panic Bar
102603-000
24V Fail Safe with Roller Keeper for Panic Bar
102604-000
24V Fail Secure with Roller Keeper for Panic Bar