Integral Wireless Access Control

Product Features

  • Stand-alone Electronic Wireless Access Control lockset with RFID Proximity reader
  • Powered by 4xAA batteries that provide up to 12 months normal usage
  • 500 event audit trail
  • Stainless Steel Escutcheon
  • Uses Australian Mortice lock (3772NOHDSS)
  • Panic release function – the deadbolt and latch are automatically retracted by inside handle for easy egress in emergency situations
  • 3 point steel latch construction withan antifriction mechanism
  • High quality card reader that reads with optimal accuracy

Door Opening Time:
Open the door after pressing the handle, automatically locks within 5 seconds

Under Voltage Indication:
Early warning given for low batteries - units willcontinue to operate for approximately 50 times until such time the batteries can be changed

Working Conditions:

  • Anti-Static Interference: >15000V
  • Working Humidity: 20%-98%
  • Working Temperature: -20°C - +70°

RFID Card:

  • RFID Card Type: ISO 14443A MIFARE®
  • Frequency: 13.56MHz
  • Induction Distance: Approx. 30mm

Energy Saving Device:

  • The intelligent energy saver controls and manages the electrical installation of the room. It allows the electricity in the room to be switched on after inserting a valid card and during the time that the card is in the energy saver.
  • It only works with hotel cards and it also incorporates RFID proximity ISO 14443A MIFARE® technology.
Ordering Information
Integral Product Reference Codes Functions


Encoder

ITGL910-ENCODER Card encoder



Locksets/Escutcheon

ITGL900-AUT1I1SS ASSA ABLOY Integral Escutcheon - AU Version (35mm - 55mm Door)
ITGL-AUT1I1KOSS ASSA ABLOY Integral Escutcheon with Key Override (35mm - 55mm Door)



Cards

ITGL920-ICCard Special IC card: Activates the card issuing system
ITGL920-RECORD Record card: Reads the audit trail information from the locking devices
ITGL920-USERCARD User Cards: Writable cards

All writable cards can program the following cards:
Setting card, Guard card, Single card, Reset card, GM card, Limit all card, Time card, Zone card, Limit card, User card, Floor card, Stop card



Product Accessories

ITGL930-ENERGY Intelligent energy saving device
ITGL930-WALL Wall mounted RFID door access controller (Includes)
- Reader & Power supply & REX (Request to exit button)
ITGL930-LIFT Lift controller 2 - 27 floors (Includes)
- Power supply & lift card reader
ITGL930-UPD Wall RFID Door Access Updater
ITGL900-HHD Hand Held NFC Programming Device
Integral Access Management Components

Access Cards

User Cards:
Opens locks (which it has been granted applicable access rights) within the “Access Control System” within a specific time period. The access rights for each user are programmed by the software and encoder User cards will not open doors that have the internal ‘Privacy mode’ set.

Access Management Setting Cards

Setting Card: Set the Address ID of door lock
Time Card: Set the door lock “real time”
Recorder Card: Reads the Audit Trail Information from the locking devices

Software Management Cards

Special IC card: Activates the card issuing system. (Management Software)
Reset Card: For initializing the door locks.(Red Light upon presentation indicates a fault.)

Encoder

  • Plug-in-and-Play USB Card Encoder
  • Easy to learn and use: it easily assigns new users and cards, it modifies them or invalidates lost or stolen cards
  • Programs all Cards Types except for the Special IC card, which is used to activate the software management system
  • Reads the audit trail of locks and cards
  • Windows® based

Door Access Controller Wall Reader

  • RFID Door Access Controller Wall Reader can be used on an entry door as part of the complete wireless access control system. It can also be used on any other common areadoors in the building
  • The RFID Door Access Controller Wall Reader can be used with a number of different electronic lock types. Compatible with electronic magnets, drop bolts, motorized locks and electric strikes
  • Includes the correct power supply and request to exit button (REX) on the inside of the door to allow convenient free egress for all users

Integral Access Control Management System

Software

A simple to use software system that makes it easy to manage and maintain your access control

  • Software available in commercial or accommodation versions
  • Basic door management software system that is simple to add and delete doors/users as necessary
  • Flexible user access rights
  • Software Management Cards for activating card issuing system and initializing the door locks
  • Access Management Setting Cards for setting the Wireless Access Control Lock ID and “realtime” clock.
  • Audits: Show and report on;
    - Lists of individual doors
    - Identification of users
    - Doors by floor, building, block, zone etc.
    - A report of every opening/closing registered by all locks/readers
    - All events relating to the operation of the software (Logins etc.)
  • Different levels for operators.(Administrators)
  • Intuitive Windows® based software connected to a USB card encoder to program/issue cards


Computer Requirements

  ASSA ABLOY Desktop Client ASSA ABLOY Server / Client
Supported Operating Systems Windows 7, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP Windows 7, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2
System Memory Minimum 2 GB Minimum 4 GB
Hard Disk 1 GB of Disk Space 4 GB of Disk Space


Processors:

ASSA ABLOY Desktop Client & ASSA ABLOY Server / Client:

X86:
Pentium III-compatible processor or faster (Processor Speed - 1.0 GHz or faster

X64:
Minimum: AMD Opteron, AMD Athlon 64, Intel Xeon with Intel EM64T support, Intel Pentium IV with EM64Tsupport (Processor Speed - 1.0 GHz or faster)